Không thể khởi động windows 10, xin cao nhân vào giúp | VN-Zoom | Cộng đồng Chia Sẻ Kiến Thức Công Nghệ và Phần Mềm Máy Tính

Adblocker detected! Please consider reading this notice.

We've detected that you are using AdBlock Plus or some other adblocking software which is preventing the page from fully loading.

We don't have any banner, Flash, animation, obnoxious sound, or popup ad. We do not implement these annoying types of ads!

We need money to operate the site, and almost all of it comes from our online advertising.

Please add https://vn-z.vn to your ad blocking whitelist or disable your adblocking software.

×

Không thể khởi động windows 10, xin cao nhân vào giúp

luanne

Gà con
Em đang vọc chuyển từ mbr sang gpt, sau khi nhập lệnh
mbr2gpt /convert
thì nó báo
Mã:
MBR2GPT: Failed to update ReAgent.xml, please try to manually disable and enable WinRE.
MBR2GPT: Before the new system can boot properly you need to switch the firmware to boot to UEFI mode!
Em nhập lệnh
Mã:
reagentc /info
nó lại báo 'reagentc' is not recognized gì đấy
Sau đó em bận tí việc, để máy thế rồi lúc về thì đứa nào đó đã tắt máy 😱😱😱😱
Bây giờ mở máy lên thì nó báo
Mã:
Reboot and Select proper Booy device
or Insert Boot Media in selected Boot device and press a key
Em là người mới, vọc chỉ toàn vọc dại, cao nhân nào chỉ em fix với😭😭
 

@sec0

Rìu Chiến Vàng Chấm
Conver Ổ CỨNG chứa HDH từ MBR sang GPT thì phải vào bios chuyển từ boot legacy sang uefi

Nếu như conver thành công , thì mới vào win được .
Nhưng 1 khi conver ổ cứng từ MBR sang GPT thì cần phải có 1 phân vùng EFI chứa system .
Tôi chưa biết dùng lệnh để conver , do đều phải lệ thuộc vào phần mềm thứ 3 .

Trước kia tôi từng conver thành công ổ cứng từ MBR sang GPT = AOMEI , nhưng lâu rồi ko conver nên ko biết giờ sẽ ra sao
 

zArtemis

Rìu Sắt
Em đang vọc chuyển từ mbr sang gpt, sau khi nhập lệnh
mbr2gpt /convert
thì nó báo
Mã:
MBR2GPT: Failed to update ReAgent.xml, please try to manually disable and enable WinRE.
MBR2GPT: Before the new system can boot properly you need to switch the firmware to boot to UEFI mode!
Em nhập lệnh
Mã:
reagentc /info
nó lại báo 'reagentc' is not recognized gì đấy
Sau đó em bận tí việc, để máy thế rồi lúc về thì đứa nào đó đã tắt máy 😱😱😱😱
Bây giờ mở máy lên thì nó báo
Mã:
Reboot and Select proper Booy device
or Insert Boot Media in selected Boot device and press a key
Em là người mới, vọc chỉ toàn vọc dại, cao nhân nào chỉ em fix với😭😭
Tốt nhất là dùng WinPE mà convert MBR hay GPT chứ làm bằng cmd này thì như trên vậy đó bạn
 


Top