UpdatePack7R2 v.24.3.13 Multilingual | VN-Zoom | Cộng đồng Chia Sẻ Kiến Thức Công Nghệ và Phần Mềm Máy Tính

Adblocker detected! Please consider reading this notice.

We've detected that you are using AdBlock Plus or some other adblocking software which is preventing the page from fully loading.

We need money to operate the site, and almost all of it comes from our online advertising.

If possible, please support us by clicking on the advertisements.

Please add vn-z.vn to your ad blocking whitelist or disable your adblocking software.

×

UpdatePack7R2 v.24.3.13 Multilingual

Shao


Junior Moderator
Thành viên BQT
l4IYbF9uecM4AW5lMdvLNXmIxqCi6wrs.jpg


UpdatePack7R2 –cho phép bạn cập nhật hệ thống đang hoạt động và tích hợp các bản cập nhật phần mềm trong bản phân phối. Có thể được cài đặt trên bất kỳ phiên bản nào của Windows 7 và Server 2008 R2, bất kỳ chữ số nào và bất kỳ ngôn ngữ nào. Bao gồm các bản cập nhật cho tất cả các phiên bản của Internet Explorer, tất cả các bản cập nhật quan trọng, được đề xuất và bảo mật. Xem chi tiết trên trang web của nhà phát triển.

Usage:
The system must have at least 10 GB of free space on the hard drive and preferably at least 1 GB of free RAM.
You can drag the pure iso distribution kit with the mouse to UpdatePack7R2 and get a ready updated iso image.
For flexible installation of the kit, you can use the following keys and their combinations:
  • Switch / Reboot to automatically reboot if required.
  • / S switch for a completely silent installation without windows or messages. Case matters.
  • / Silent switch for passive installation - progress is visible, but the installation is fully automatic.
  • The / Temp = switch allows you to specify a temporary working directory. It doesn't have to be empty, but it must exist.
  • The / NoSpace key allows you to skip checking the free space on the system partition; it is not recommended to use it.
  • The / FixOn switch enables protection against Meltdown and Specter, and / FixOff turns it off. Without keys, protection is disabled for Win7, and enabled for Win2008R2.


– Examples:
• You want to automatically install all updates, IE11, and restart your computer: UpdatePack7R2.exe / ie11 / silent / reboot
• Private need to install all the updates to existing products, the version of IE does not change, the computer does not restart: UpdatePack7R2.exe / S
• The following keys are designed to integrate the updates in this distribution:
• Key / WimFile = specifies the location of wim-file, you must specify an absolute path.
• Key / Index = indicates an index system wim-file for each index is necessary to perform the integration again.
• Key / Index = * allows you to integrate in turn updates all indexes wim-file.

– Notes:
• Before specifying the index is useful to execute the command: Dism / Get-WimInfo /WimFile:C:\install.wim (replace the path to your own).
• Not all updates can be integrated (see table), but they do not affect the safety of the system.

– Examples:
• Need to integrate IE11 and all updates to the index 1: UpdatePack7R2.exe / ie11 /WimFile=C:\install.wim / Index = 1
• Need to integrate IE11 and all updates to all indexes: UpdatePack7R2.exe / ie11 /WimFile=C:\install.wim / Index = *
• Need to integrate only the updates to existing products, do not change the version of IE: UpdatePack7R2.exe /WimFile=C:\install.wim / Index = 1

Additional Functionality
• You can automatically install SP1, if it is not installed on your system. To do this, place the files Windows6.1-KB976932-X86.exe and Windows6.1-KB976932-X64.exe in the same directory with the set.
• If there is a set of UpdatePack7R2Start.cmd – it will be done before installing the updates, UpdatePack7R2Finish.cmd – after installation, UpdatePack7R2Wim.cmd – after the integration of updates. By default, the console window will be displayed. To hide them, the first line in the cmd-file must begin with “: hide” (without the quotes). An update rollup monitors the exit code of cmd-file, in case you need to reboot. This code is 3010 (3010 exit command).
• If you want to apply your tweaks after you install Internet Explorer 11 on a working system, locate the folder with the file set ie11.reg and it will be imported automatically.
Some keys can be replaced by the renaming of the file set. So to install IE11, you can add the word “ie11” in any place of the file name set, “-” for the automatic reboot and “++” passive installation.

– Examples:
• You want to automatically install the system for working with IE11 and reboot: Rename UpdatePack7R2.exe in UpdatePack7R2 – ie11 ++. Exe
• It is absolutely the same as using the following keys: UpdatePack7R2.exe / ie11 / silent / reboot

Notes
• The size distribution (wim-file) will be increased by the size of installed updates.
• Integrated update can be removed, even after installation.
• It is recommended to unload from memory resident antivirus monitor for the duration of the set.
• A detailed log of the updates is in the file% WinDir% \ UpdatePack7.log.


What New:
24.3.13
  • Added KB5035888-x86-x64 with disabling telemetry and processor checking (replaces KB5034831-x86-x64)
  • Certificate update is similar to KB931125 and KB2917500 for March 2024
  • The following updates are not relevant and have been removed : KB2547666-x86-x64, KB2667402-v2-x86-x64, KB2698365-x86-x64, KB2732059-v5-x86-x64, KB2773072-x86-x64, KB2834140-v2-x86-x6 4, KB2862330 -v2-x86-x64, KB2894844-x86-x64, KB2919469-x86-x64, KB2970228-x86-x64, KB2984972-x86-x64, KB3004375-v3-x86-x64, KB3006137-x86-x64, KB4575903-x86-x64





Title Release: UpdatePack7R2.v.7 24.3.13
Developer: Home Page
License: FreeWare
OS: Windows




P6eRbc.png









 
Sửa lần cuối:

tronghieuvn

Búa Đá
Thanks ad , ai đã update UpdatePack7R2 v.23.7.12 xin cho đánh giá ...
 

Shao


Junior Moderator
Thành viên BQT
UpdatePack7R2 v.24.3.13 Multilingual - New update vesion
 


Top