Hướng dẫn - Rebuild lại bộ cài windows 7 - 8 - 10 | Page 12 | VN-Zoom | Cộng đồng Chia Sẻ Kiến Thức Công Nghệ và Phần Mềm Máy Tính

Adblocker detected! Please consider reading this notice.

We've detected that you are using AdBlock Plus or some other adblocking software which is preventing the page from fully loading.

We need money to operate the site, and almost all of it comes from our online advertising.

If possible, please support us by clicking on the advertisements.

Please add vn-z.vn to your ad blocking whitelist or disable your adblocking software.

×

Hướng dẫn Rebuild lại bộ cài windows 7 - 8 - 10

@sec0

Rìu Chiến Vàng Chấm
Bạn phải upanh vào 1 host nào đó sau đó copy direct link , ko thể upanh trực tiếp từ máy tính vào bài viết được = cách kéo thả khi nó lớn hơn 149KB
ví như host này pik.vn
Nếu bạn chưa biết thì trò chuyện teamview tôi làm 1 lần trên máy của bạn , bạn nhìn và nhớ sau nay tự post , 10 phút nữa tôi out
2021-01-11_141654.png
 
Sửa lần cuối:

secpol

Rìu Chiến Bạc
16/01/2021:
  • Update Driver Chipset support CPU Intel 11th for Windows10
Note: Các bạn setup windows 10 trên CPU Intel thế hệ 11 cần trỏ Driver về folder: \Driver-Chipset-SATA-NVMe-USB3.0-3.1-HM-16012021\Windows10\x64 hoặc \Driver-Chipset-SATA-NVMe-USB3.0-3.1-HM-16012021\Windows10\x86 để Windows nhận được ổ cứng. Hoặc bạn tích hợp vào bộ cài Windows trước khi tiến hành setup như hướng dẫn tại post #1.
 

manhcuonghg

Búa Gỗ Đôi
- Mình muốn Rebuild lại bộ cài Win 7 và Win 10 cho gia đình mình dùng mà hướng dẫn của chủ píc nhiều chỗ đã bị die hình hướng dẫn rồi. Chủ píc hoạc ai biét hướng dẫn mình hoặc gửi Hdan vào mail [email protected] để mình học hỏi với ạ. E xin cám ơn
 

secpol

Rìu Chiến Bạc
- Mình muốn Rebuild lại bộ cài Win 7 và Win 10 cho gia đình mình dùng mà hướng dẫn của chủ píc nhiều chỗ đã bị die hình hướng dẫn rồi. Chủ píc hoạc ai biét hướng dẫn mình hoặc gửi Hdan vào mail [email protected] để mình học hỏi với ạ. E xin cám ơn
Bài hướng dẫn chính của mình nó nằm ở post #1. Các bình luận bên dưới chỉ là trao đổi những vấn đề còn vướng mắc trong quá trình làm. Bài hướng dẫn này hiện chỉ duy nhất có ở VN-Z.VN. Tất cả các hình mình mình đều up lên server của VNZ nên nếu die hình nào bạn báo lại giúp mình để mình sửa lại. Cảm ơn bạn đã đọc bài!
 
Sửa lần cuối:

hungnth

Rìu Vàng Đôi
Cảm ơn bác hướng dẫn cụ thể, thấy được tâm huyết của bác ở trong bài hướng dẫn.
Mình đã làm được 2 bộ, 1 cho công ty, 1 cho cá nhân dùng rất là ưng ý, cảm ơn bác nhiều. Chúc bác nhiều sức khỏe.
Trước khi thấy bài viết của bác, mỗi lần mà cài máy cho công ty, xong cài phần mềm đồ các thứ tốn 1 đống thời gian, còn bây giờ chỉ cần boot vào WinPE xong làm vài thao tác để nó chạy là xong. Khỏe cả đôi đường.
 
Sửa lần cuối:

NecrolyseS

Rìu Sắt
Cảm ơn bác đã chia sẻ và hướng dẫn, em cảm thấy rất nhiều tâm huyết của bác trong bài viết này.
Em muốn hỏi thêm là các bản windows do bác build và share kia đều có thể update bình thường chứ? nếu update thì có ảnh hưởng gì đến những nội dung bác đã làm không?
Cảm ơn bác ạ
 

secpol

Rìu Chiến Bạc
Cảm ơn bác đã chia sẻ và hướng dẫn, em cảm thấy rất nhiều tâm huyết của bác trong bài viết này.
Em muốn hỏi thêm là các bản windows do bác build và share kia đều có thể update bình thường chứ? nếu update thì có ảnh hưởng gì đến những nội dung bác đã làm không?
Cảm ơn bác ạ
Bạn update thoải mái nhé :) Mình còn khuyến khích update nữa cơ :D
 

ahihi1995

Gà con
Tại bước capture thì mình khuyến khích dùng lệnh hơn là dùng soft. Nếu bạn đã capture thành file wim rồi thì bạn có thể nén tiếp bằng lệnh:
Mã:
Dism /Export-Image /SourceImageFile: /SourceIndex: /DestinationImageFile: /Compress:recovery
/SourceImageFile: là đường đẫn đến file wim
/SourceIndex: là số thứ tự image trong file wim. Như trường hợp của bạn thì là 1
/DestinationImageFile: Nó là đường dẫn đến file install.esd sẽ tạo

Thời gian để nén với bản x64 nó tầm 60 ~ 90' áp dụng cho image đầu tiên. Còn với những image khác thì sẽ rất nhanh nhưng cũng phụ thuộc vào sự khác nhau giữa 2 image. Hệ thống sẽ sử dụng CPU, RAM và ở cứng rất cao.
Bạn cho mình hỏi lệnh capture .esd trên là thao tác bằng cmd trên máy thật đúng không bạn
 

secpol

Rìu Chiến Bạc
10/02/2021:
  • Update Intel RSTe NVMe Driver v7.0.0.2286 WHQL for Win7-10 x64
  • Update Intel VROC NVMe RAID driver v7.0.0.2286 for Win8-10 x64
  • Update Intel RSTe NVMe Driver v7.5.0.1990 for Win7-10 x64
  • Update Intel RST AHCI-RAID-NVMe drivers v18.31.2.1034 WHQL for Win10 x64 (Driver date: 12/2020)
  • Update Intel RST VMD driver v18.1.2.1034 WHQL for Win10 x64 (Driver date: 12/2020)
  • Update driver Intel Chipset
 

ahihi1995

Gà con
Yes. Làm trên máy thật là tối ưu nhất.
Bạn cho mình hỏi một vấn đề ngoài lề một chút:
Mình muốn tạo một cái lệnh tự động chia ổ đĩa .bat, bên trong có dòng lệnh sau:

diskpart
list volum
select volume 0
shrink desired=51200
create partition primary
format fs=ntfs quick
assign letter=D
exit
label D: DU LIEU
pause

Khi mình mở cmd lên gõ từng lệnh một thì ok. Nhưng khi mình chạy file .bat đó thì nó chỉ thực thi dòng lệnh đầu tiên là: diskpart
Còn dòng lệnh thứ 2 trở đi nó không chạy, bạn cho mình hỏi trong trường hợp này có cách nào cho nó chạy được hết trong một lần click file.bat đó không bạn?
 

secpol

Rìu Chiến Bạc
Bạn cho mình hỏi một vấn đề ngoài lề một chút:
Mình muốn tạo một cái lệnh tự động chia ổ đĩa .bat, bên trong có dòng lệnh sau:

diskpart
list volum
select volume 0
shrink desired=51200
create partition primary
format fs=ntfs quick
assign letter=D
exit
label D: DU LIEU
pause

Khi mình mở cmd lên gõ từng lệnh một thì ok. Nhưng khi mình chạy file .bat đó thì nó chỉ thực thi dòng lệnh đầu tiên là: diskpart
Còn dòng lệnh thứ 2 trở đi nó không chạy, bạn cho mình hỏi trong trường hợp này có cách nào cho nó chạy được hết trong một lần click file.bat đó không bạn?
Bạn sử dụng lệnh bên dưới với scriptname.txt bạn lấy ở Bonus2 -> Phần VIII -> Mục 2.7:

Mã:
diskpart /s scriptname.txt

Ví dụ:

Configure BIOS/MBR-Based Hard Disk Partitions:
Bash:
select disk 0
clean
create partition primary size=350
format quick fs=ntfs label="System"
assign letter="S"
create partition primary
format quick fs=ntfs label="Windows"
assign letter="W"
exit

Configure UEFI/GPT-Based Hard Drive Partitions:
Bash:
select disk 0
clean
convert gpt
create partition primary size=300
format quick fs=ntfs label="Windows RE tools"
assign letter="T"
create partition efi size=100
rem == Note: for Advanced Format Generation One drives, change to size=260.

format quick fs=fat32 label="System"
assign letter="S"
create partition msr size=128
create partition primary
format quick fs=ntfs label="Windows"
assign letter="W"

From MS:

To shrink a basic volume using a command line​


  1. Open a command prompt and type diskpart.
  2. At the DISKPART prompt, type list volume. Note the number of the simple volume you want to shrink.
  3. At the DISKPART prompt, type select volume <volumenumber>. Selects the simple volume volumenumber you want to shrink.
  4. At the DISKPART prompt, type shrink [desired=<desiredsize>] [minimum=<minimumsize>]. Shrinks the selected volume to desiredsize in megabytes (MB) if possible, or to minimumsize if desiredsize is too large.

To shrink a basic volume using a command line
ValueDescription
list volumeDisplays a list of basic and dynamic volumes on all disks.
select volumeSelects the specified volume, where volumenumber is the volume number, and gives it focus. If no volume is specified, the select command lists the current volume with focus. You can specify the volume by number, drive letter, or mount point path. On a basic disk, selecting a volume also gives the corresponding partition focus.
shrinkShrinks the volume with focus to create unallocated space. No data loss occurs. If the partition includes unmovable files (such as the page file or the shadow copy storage area), the volume will shrink to the point where the unmovable files are located.
desired= desiredsizeThe amount of space, in megabytes, to recover to the current partition.
minimum= minimumsizeThe minimum amount of space, in megabytes, to recover to the current partition. If you do not specify a desired or minimum size, the command will reclaim the maximum amount of space possible.
 
Sửa lần cuối:


Top